Updating the fru and sensor data
Link Asym.ipmitool help Commands: raw Send a RAW IPMI request and print response i2c Send an I2C Master Write-Read command and print response spd Print SPD info from remote I2C device lan Configure LAN Channels chassis Get chassis status and set power state power Shortcut to chassis power commands event Send events to MC mc Management Controller status and global enables sdr Print Sensor Data Repository entries and readings sensor Print detailed sensor information fru Print built-in FRU and scan for FRU locators sel Print System Event Log (SEL) pef Configure Platform Event Filtering (PEF) sol Configure and connect IPMIv2.0 Serial-over-LAN tsol Configure and connect Tyan IPMIv1.5 Serial-over-LAN isol Configure and connect Intel IPMIv1.5 Serial-over-LAN user Configure Management Controller users channel Configure Management Controller channels session Print session information sunoem Manage Sun OEM Extensions kontronoem Manage Kontron OEM Extensions picmg Run a PICMG/ATA extended command firewall Configure Firmware Firewall shell Launch interactive IPMI shell exec Run list of commands from file set Set runtime variable for shell and exec delloem Manage Dell OEM Extensions echo Used to echo lines to stdout in scripts ekanalyzer run FRU-Ekeying analyzer using FRU filesipmitool chassis help Chassis Commands: status, power, identify, policy, restart_cause, poh, bootdev, bootparam, selftest ipmitool chassis power help chassis power Commands: status, on, off, cycle, reset, diag, soft Provides a power off interval of at least 1 second.No action should occur if chassis power is in S4/S5 state, but it is recommended to check power state first and only issue a power cycle command if the system power is on or in lower sleep state than S4/S5. This can be done in a number of ways, commonly by simulating an overtemperture or by simulating a power button press.IPMI management of a local system interface requires a compatible IPMI kernel driver to be installed and configured. Link Asym.Match: exact match *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-* On-Carrier Device vs AMC slot A2 AMC slot A2 port 0 == On-Carrier Device 0 port 3 Matching Result - From On-Carrier Device ID 0 -Channel ID 9
When an IPMI password is changed on a remote machine with the IPMIv1.5 lan interface the new password is sent across the network as clear text.